User guide

Configuring the Access Point

Configuring for Standalone Operation or for Management by FlexMaster

Configure Common Wireless Settings

1. On the left menu of the Web interface, click Configuration > Wireless. The Common

page appears.

2. Verify that the common wireless settings are configured as listed in Table 5

3. If you made any changes to the Common tab, click Update Settings.

4. Continue to “Configure Wireless # Settings”

below.

Table 4. Default wireless settings

Setting Default Value

SSID (network name) Wireless 1 to Wireless 8 (8 WLANs)

Encryption (security) Disabled on all WLANs

Default management IP address 192.168.0.1

Table 5. Common wireless configuration

Setting Recommended Value

Wireless Mode Auto-select

Channel SmartSelect

Country Code • If you purchased the Access Point in the United

States, this value is fixed to United States at the

factory and is not user configurable.

• If you purchased the Access Point outside the

United States, verify that the value is set to your

country or region. Selecting the correct country

code ensures that the Access Point uses only the

radio channels allowed in your country or region.