User guide

8
Before You Begin
Get to Know the Access Point Features
If you want to extend the range of your wireless network, you can connect an external high
gain antenna to the standard N-type radio frequency (RF) antenna connector on the top
panel of the Access Point. The antenna must have a gain of less than 9dBi to comply with
FCC and CE regulations. For more information, refer to “(Optional) Mounting and
Connecting the External Antenna” on page 50.
Figure 4. The antenna connector is protected by a metal cap
PWR • Green: The Access Point is connected to a power
source.
• Off: No power is available, or the Access Point is not
connected to a power source.
Table 2. LED states and behaviors
LED Meaning
Metal Cap