User guide

Ruckus Wireless ZoneFlex 2925/2942 User Guide | Managing the Access Point
52
FIGURE 4-15
Changing a VLAN ID
This task should be performed by an experienced network administrator or are under the guidance of an IT/support
professional.
1 After logging into the Web User interface, click VLAN under Administrator.
The Administrator::VLAN workspace appears.
2 Clear the value in the VLAN ID column, and type the new value.
3 Click Update Settings (test) to verify connectivity prior to saving changes. This pre-
vents you from being locked out in the event you were to change the Management
interface VLAN ID.
Changing the port state for a VLAN
This task should be performed by an experienced network administrator or are under the guidance of an IT/support
professional.
1 After logging into the Web User interface, click VLAN under Administrator.
The Administrator::VLAN workspace appears.
2 Click a green check mark to change the state between member, non-member, or
tagged member.
ALERT
This works best in conjunction with “Changing the port state for a VLAN” and “Changing an
RJ45 port’s VLAN tagged state” for individual state changes.