User guide

Ruckus Wireless ZoneFlex 2925/2942 User Guide | Managing the Access Point

CTS-only Choose this option to force all destination devices to acknowledge

their ability to receive data when a transmission is initiated.

RTS/CTS Choose this option to force both sending and receiving devices to con-

firm a data exchange on both ends before proceeding.

For information on “Protection Mode”-specific Threshold options and how they can be

customized on an individual hotspot basis, see

“Setting Threshold Options” on

page 27.

5 Click Update Settings to save and apply the changes.

Changing the Wireless Availability Setting

This controls whether or not a hotspot is active. To deactivate a hotspot, use this feature.

1 Open the Web User interface, and click Wireless under Configuration.

2 When the Configure::Wireless::Common workspace appears, click the relevant

hotspot-specific tab.

FIGURE 4-7

3 When the Configure::Wireless::Wireless [#] workspace appears, click one of two Wire-

less Availability options for this hotspot.

4 Repeat the previous step with the remaining hotspot tabs, as needed.

5 Click Update Settings to save and apply the changes.

Changing the Broadcast SSID setting

This controls whether or not a hotspot sends out an SSID to any nearby wireless devices. If

you deactivate it, you control access to a hotspot to those people who “know the hotspot

name”.

1 Open the Web User interface, and click Wireless under Configuration.