User guide

Ruckus Wireless ZoneFlex 2925/2942 User Guide | Managing the Access Point
38
Maintaining your HotSpot AP
This section highlights a collection of individual, context-free tasks culled from the Web
User interface (and detailed here for your convenience).
Maintenance topics covered in this section
• To change the device name of an AP, turn to page 38.
• To change the common wireless mode, turn to page 39.
• To change the common wireless channel, turn to page 40.
• To change the common wireless data rate, turn to page 40.
• To change the transmit power level, turn to page 40.
• To change the beacon interval, turn to page 41.
• To change the overall protection mode, turn to page 41.
• To change the status of wireless availability through the AP, turn to page 42.
• To change how SSIDs are broadcast, turn to page 42.
• To change the broadcast status of a hotspot-specific SSID, turn to page 43.
Changing the Device Name
1 After opening the Web User interface, click Device under Configuration.
2 Make any changes in the Device Name field in the Configure::Device workspace.
3 Click Update Settings to save and apply the changes.
FIGURE 4-1