User guide

Ruckus Wireless ZoneFlex 2925/2942 User Guide | After the Installation (Post-Installation Setup)
36
Reviewing Current VLAN IDs
1 After logging into the Web User interface, click VLAN under Configuration.
The Configuration::VLAN workspace appears.
FIGURE 3-16
2 Review the current IDs.
3 Make any changes, if needed.
4 Click Update Settings (test).
For more on VLAN configuration, see “VLANs” on page 49.
ALERT
Do not make any changes to these options unless you are an experienced network adminis-
trator or are under the guidance of an IT/support professional.
FIGURE 3-15