User guide

Ruckus Wireless ZoneFlex 2925/2942 User Guide | After the Installation (Post-Installation Setup)
27
device. This is important in a mixed environment of both 802.11b and
802.11g clients. WARNING: Activating this option (and configuring the
settings) boosts the interoperability of 802.11b and 802.11g devices
but will severely decrease performance.
CTS-onlyChoose this option to force all destination devices to acknowl-
edge their ability to receive data when a transmis-
sion is initiated.
RTS/CTSChoose this option to force both sending and receiving devices
to confirm a data exchange on both ends before
proceeding.
For information on “Protection Mode”-specific Threshold options and
how they can be customized on an individual hotspot basis, see the
following section,
“Setting Threshold Options”.
3 Click Update Settings to save and apply the changes.
Setting Threshold Options
The following options allow you to fine-tune the “Protection Mode” behavior, set previously
in the Wireless::Common workspace. After activating a Protection Mode, you can open each
Wireless tab and customize the threshold settings, that determine what is put in effect and
when.
To customize Protection Mode (Threshold) settings, follow these steps:
1 Open the Web User interface, and click Wireless under Configuration.
2 When the Configure::Wireless::Common workspace appears, click a hotspot-specific
tab.
ALERT
Do not undertake the customizing of these options unless you are an experienced network
administrator or are under the guidance of an IT/support professional.