User guide

Ruckus Wireless ZoneFlex 2925/2942 User Guide | Installation, Setup, and Placement of the AP

VF2942 Features

The following illustrations and tables show and describe the side and rear views of the

ZF2942 AP. The side view highlights the four LED indicators that can be used to assess both

device and network status. The rear view displays the connector panel, which includes the

LAN ports and the optional external antenna connection.

Security Considerations

The ZF2942 chassis includes a Kensington lock (on the side of the unit opposite the OPT and

DIR LEDs) and a locakble sliding “door” (shown below) that hides the rear connector I/O

panel and the side status LEDs. As your ZF2942 may be placed in a public location, the lock

and door mechanisms can prevent tampering or theft.

FIGURE 2-3: Side view

[1] OPT LED

[2] DIR LED

[3] AIR LED

[4] WLAN LED

[5] HARD RESET Button

Pushing and quickly releasing this internal

button reboots the AP. Pushing and holding

it for 6 seconds resets the AP to factory

defaults.

[6] Sliding Door

[7] Kensington Lock (not pictured)

The Kensington lock feature, located on the

opposite side of the unit from the pictured

LEDs, is designed to prevent the sliding door

from opening, thus locking the unit. The

Kensington lock works with a Kensington

MicroSaver lock.