User guide

Managing the Smart Wi-Fi Gateway

Upgrading the Firmware

5. In Schedule Reboot Time after Upgrade, select the time (GMT) when the Smart

Wi-Fi Gateway will be rebooted automatically after the new firmware is down-

loaded. The Smart Wi-Fi Gateway requires a reboot to complete the upgrade

process. Ruckus Wireless recommends that you select an offpeak hour so fewer

users would be affected by the reboot.

6. Specify when you want the Smart Wi-Fi Gateway to check for firmware upgrades:

• To check immediately, click Perform Upgrade. If a firmware upgrade is

available, the Smart Wi-Fi Gateway will download it from the specified source

immediately. A status bar appears, which displays the progress of the upgrade

process. To complete the upgrade process, it will reboot automatically at the

reboot time that you specified.

• To check for available firmware upgrades at the time interval that you specified,

click Save parameters only. The Smart Wi-Fi Gateway’s clock starts counting

down to the specified time interval and, when the time interval is reached,

checks the firmware upgrade source and downloads any available firmware

upgrade. To complete the upgrade process, it will reboot automatically at the

reboot time that you specified.

You have completed configure the automatic upgrade schedule.