User guide

73
Managing the Smart Wi-Fi Gateway
Upgrading the Firmware
Configuring Automatic Upgrade
Configure the automatic upgrade schedule to enable the Smart Wi-Fi Gateway to
check a firmware upgrade source for available downloads and upgrade its firmware
automatically.
Figure 41. The Auto Upgrade section on the Upgrade page
To configure automatic upgrade
1. In the Upgrade Method options, click the button for your preferred upgrade
method.
NOTE: Automatic Upgrade is only available if you select TFTP, FTP, or Web as the
Upgrade Method.
2. In Firmware Server or URL (depending in whether selected TFTP/FTP or Web as
the upgrade method), type the host name, IP address, or URL where the Smart
Wi-Fi Gateway can automatically download the firmware.
CAUTION: Do not change any of the Image Control File, Username, or Password
entries.
3. In Auto Upgrade, verify that the Enabled option is selected (active).
4. In Interval to Check for Software Upgrade, select the time interval when you
want the Smart Wi-Fi Gateway to automatically check for firmware upgrades.
Options range from 1 hour to 4 weeks.