User guide

Managing the Smart Wi-Fi Gateway

Upgrading the Firmware

You can use the Web interface to check for software updates/upgrades for the

firmware built into the Smart Wi-Fi Gateway. You can then apply these updates to the

device in one of two ways:

■ Manually updating on an as-needed basis, or;

■ Automating the update by setting an update schedule.

Before starting, decide which option you want to take:

■ Automate a regularly scheduled update

■ Run a one-time manual update right now.

By default, the automatic upgrade option is active, and will check the Ruckus Wireless

update server every 12 hours.

To get started with upgrading the firmware, go to Maintenance > Upgrade. When

the Maintenance > Upgrade options appear, decide which upgrade method to use.

Each of the three upgrade options listed on the Upgrade page are discussed in the

succeeding sections.

Figure 40. The Maintenance > Upgrade page