User guide

65
Managing the Smart Wi-Fi Gateway
Changing the Administrative Login Settings
If you want to make changes to any of these settings, go to the Configuration >
Wireless page. Refer to “
Configuring Common Wireless Settings” on page 39 for
more information.
Changing the Administrative Login Settings
The default user name is super and the default password is sp-admin. To prevent
unauthorized users from logging in to the Web interface using these default admin-
istrator login settings, Ruckus Wireless recommends that you change the default Web
interface password immediately after your first login.
To change the default administrator login settings
1. Log into the Web interface.
2. Go to Configuration > Device. The Device page appears.
3. Under Service Provider Login, change the default administrator login settings.
• (Optional) In Username, type a new user name that you will use to log in to
the Web interface. The default user name is super.
•In Password, type a new password to replace the default password sp-admin.
•In Password Confirmation, retype the new password.
4. Click Update Settings. The message Your parameters were saved appears.
Table 12. Common Wireless settings
Setting Description
Wireless Mode Shows the wireless mode that the Smart Wi-Fi
Gateway is currently using. Possible values
include:
• 11b/g/n
• 11b/g
• 11b only
• 11g only
Channel Shows the wireless channel that the Smart Wi-Fi
Gateway is currently using. If you set the wireless
channel to SmartSelect, this field will show the
value Channel # [SmartSelect].
Country Code Shows the country code that the Smart Wi-Fi
Gateway has been set to use.
CAUTION: Verify that the Smart Wi-Fi Gateway is
using the correct country code to make sure it uses
only the allowed radio channels in your region.
Selecting the incorrect country code may result in
violation of application laws.