User guide

59
Configuring the Smart Wi-Fi Gateway
Running the Smart Configuration Wizard
Figure 33. Select the Wireless Broadband Network, and then type the network
password (if required)
6. Click Next. The Wireless 1 (WLAN) configuration page appears.
Smart Wi-Fi Gateway MF7211 and MF7211-EXT models provide two wireless
interfaces that allow wireless clients on your home network to associate with the
Smart Wi-Fi Gateway directly.
NOTE: This option is only available on MF7211 and MF7211-EXT models.
7. Configure the first wireless interface on this wizard page.
•In What is your network name? (SSID), type a name that you want to assign
to your WLAN. For example, you can type WLAN1.
•In What type of security are you using?, click the wireless security settings
that you want to use. Clicking Open disables wireless security, while clicking
either WEP or WPA prompts you for a wireless network password.
Type a wireless network password in the box provided. Wireless users that
attempt to associate with this WLAN will be required to provide the same
password before they are allowed access.
NOTE: This option is only available on MF7211 and MF7211-EXT models.