User guide

53
Configuring the Smart Wi-Fi Gateway
Configuring Port Forwarding
Figure 29. Editing port forwarding entries
■ To enable port forwarding for a Web application, click the (Enable) option that
is on the same row as the application name, and then click Update.
■ To delete a port forwarding entry, click the (Delete) option that is on the same
row as the application name, and then click Update.
■ To disable a port forwarding entry, click the (Disable) option that is on the same
row as the application name, and then click Update.
■ For instructions on how to add a new port forwarding entry, refer to “Adding a
Port Forwarding Entry” below.
Adding a Port Forwarding Entry
To add a new port forwarding entry, click the Add new entry button. Complete the
form that appears below by configuring in the following options:
• Name: Assign a unique name to the entry that you are creating.
• Start port: The starting port number to include in the entry.
• End port: The ending port number to include in the entry.
• Protocol: Select the traffic protocol that you want to forward. Options include
TCP, UDP, and Both.
• Forward to IP Address: Type the IP address of the device on your home
network to which you want to forward the traffic.
• Enable: Click this option to enable the port forwarding entry.
Click Update to save the port forwarding entry.