User guide

22
Installing the Smart Wi-Fi Gateway
Installing the MF7211-Outdoor Model
6. Select the topology that best describes your network setup, and then click Next.
The two topology options include:
• connect your wireless computer(s) to a Metro Wi-Fi network (Router
mode)
• connect your home router to a Metro Wi-Fi network (Bridge mode)
The device checks for available wireless networks with which it can associate and
displays these networks on the next page.
7. Click the option button for the network with which you want the device to
associate. If that wireless network is using encryption or authentication, type the
security settings in the boxes that appear.
8. Click Next. A summary of the settings that you have configured appears.
9. Click Reboot to apply your changes. A popup message appears, informing you
that the reboot process may take a few minutes.
10.Click OK. When the reboot process is complete, a popup message appears and
prompts you to click the OK button to reconnect to the Web interface.
11.Click the OK button.
You have completed configuring the device using the Quick Start Wizard.
Step 4: Verify That the Device Can Connect to the
Internet
After you complete the Quick Start Wizard, your computer should be able to connect
to the Internet via the device. Perform these steps to check.
1. On your computer, open a browser window.
2. In the address or location bar, type
www.ruckuswireless.com.
If the Ruckus Wireless Web site loads in your browser, you are able to connect to the
Internet.
Congratulations! Your wireless network is now active and ready for use.