User guide

Installing the Smart Wi-Fi Gateway

Installing the MF7211-Outdoor Model

Before starting with the installation, make sure that you have the following items that

are required for the installation ready:

■ A computer with a Web browser

■ Two CAT5 Ethernet cables

■ The PoE injector and power adapter that are supplied with the device.

CAUTION: The Outdoor Smart Wi-Fi Gateway is not 802.3af compliant. You must use

only the PoE injector and power adapter that are supplied with the device.

■ Your service provider’s Wireless Broadband Network SSID and security settings.

You will need to enter these settings on the device’s Web interface to enable it to

connect to the Wireless Broadband Network service.

Step 1: Prepare the Administrative Computer

The administrative computer is the computer that you will be using to access the

device’s Web interface. To access the Web interface, the administrative computer

must be configured to obtain an IP address automatically.

1. Power on your computer.

2. Go to the network connection settings.

• On Windows 2000, click Start > Settings > Network, and then click Dialup

Connections.

• On Windows XP, click Start > Settings > Control Panel > Network

Connections.

3. Double-click the icon for Local Area Connection.

4. In the Local Area Connection Properties window, select Internet Protocol (TCP/

IP), and then click Properties.

5. Select Obtain an IP address automatically, and then click OK to exit the TCP/IP

Properties window.

6. Click OK to exit the Local Area Connection Properties window.