User guide

16
Installing the Smart Wi-Fi Gateway
Installing the MF7211/MF7211-EXT Model
• What type of security are you using?: Select the type of wireless security that
you want to use. Options include Open (no security), WEP, and WPA. If you
select WEP or WPA, you must type a password in the box provided.
WEP passwords must consist of either 5 or 13 characters. WPA passwords must
be between 8 and 63 characters.
When users connect to this WLAN, they will be prompted for this password
before they are allowed access to the wireless network.
4. Click Finish. A summary of the settings that you have configured appears.
5. Click Reboot to apply your changes. A popup message appears, informing you
that the reboot process may take a few minutes.
6. Click OK. When the reboot process is complete, a popup message appears and
prompts you to click the OK button to reconnect to the Web interface.
7. Click the OK button.
You have completed configuring the device using the Quick Start Wizard.
If You Selected Bridge Mode
1. Click the option button for the wireless network with which you want the device
to associate. If that wireless network is using encryption or authentication, type
the security settings in the boxes that appear.
2. Click Next. A summary of the settings that you have configured appears.
3. Click Reboot to apply your changes. A popup message appears, informing you
that the reboot process may take a few minutes.
4. Click OK. When the reboot process is complete, a popup message appears and
prompt you to click the OK button to reconnect to the Web interface.
5. Click the OK button.
You have completed configuring the device using the Quick Start Wizard.
Step 4: Verify That Your Computer Can Connect to
the Internet
After you complete the Quick Start Wizard, your computer should now be able to
connect to your service provider’s Wireless Broadband Network and the Internet via
the device. Perform these steps to check.
1. On your computer, open a browser window.
2. In the address or location bar, type
www.ruckuswireless.com.
If the Ruckus Wireless Web site loads in your browser, you are able to connect to the
Internet.
Congratulations! Your wireless network is now active and ready for use.