User guide

13
Installing the Smart Wi-Fi Gateway
Installing the MF7211/MF7211-EXT Model
3. Take out the CAT5 Ethernet cable. Connect one end of the CAT5 Ethernet cable
to the Ethernet port on your computer, and then connect the other end to the
Ethernet port on the device (see Figure 6
).
Figure 6. Side panel of Indoor/EXT Smart Wi-Fi Gateway
Step 3: Configure the Device Using the Quick Start
Wizard
Before you start this step, make sure you have already obtained the Wireless Broad-
band Network SSID and security settings from your service provider.
1. On your computer, open a Web browser window.
2. In the address or location bar, enter 192.168.30.1.
3. When the login screen appears, type super as the user name and sp-admin as
the password.
Ethernet port
Reset button
External antenna
connector (EXT
model only)
DC IN port