User`s guide

78 Ruckus Metro Broadband Gateway USM-Metro-RKS1-091807-01
Rebooting or Resetting the Device
Rebooting or Resetting the Device
You may be required to reboot the device for configuration changes to take effect.
Two types of reboot are provided:
• If the system times out and you have to re-login before setting the reboot, your configuration changes will
be saved, as long as you have already clicked the Update button to save the current configuration.
• If you have powered down or logged out of the Metro Broadband Gateway before clicking the Update
Settings button and the Reboot button, your configuration changes will be lost.
The Reset to factory settings? option restarts the device with the factory default configurations. All
previous configurations will be lost.
1. To reboot for either type, click Maintenance :: Reboot / Reset.
2. Click Reboot Now to reboot. Current settings are saved.
3. Click Reset Now to reset the device to factory default settings. All configurations are lost.
Figure 67—Maintenance :: Reboot or Reset page
During a reboot, the antenna LEDs on the top of the Metro Broadband Gateway will momentarily go out,
then light up again.
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]