User`s guide

USM-Metro-RKS1-091807-01 Ruckus Metro Broadband Gateway 77
Upgrading the Firmware
Automatic Firmware Upgrade
For TFTP and FTP, the Firmware Server, Port, Image Control File, User Name (FTP only), and
Password (FTP only) have been preconfigured to automatically access Ruckus Wireless’s firmware update
website. For Web, the URL has been pre-configured as well.
The default interval for checking for new updates is 12 hours, as shown in the Interval to Check for
Software Upgrade drop-down list. You can set this to a longer or shorter interval as required.
1. If you have changed any of the upgrade parameters, such as the interval, click the Save Parameters only
button.The system will update the firmware as configured.
Manual Firmware Upgrade
Contact your service provider for more information about Web sites or TFTP/FTP sites used to store
firmware images for the Metro Broadband Gateway.
!
CAUTION:—If you have recently made configuration changes to the Metro Broadband Gateway, make sure
to reboot the system (see “Rebooting or Resetting the Device” on page 78) first so that your changes are
preserved. Then update the firmware.
To choose the manual firmware upgrade option, proceed as follows:
1. Go to Maintenance :: Upgrade and click Perform Upgrade.
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]