User`s guide

70 Ruckus Metro Broadband Gateway USM-Metro-RKS1-091807-01
Activating the Log and Sending the Log to a Syslog Server
Activating the Log and Sending the Log to a Syslog Server
1. After logging in to the Web User interface, click Log under Administrator.
Figure 62—Administrator :: Log page
2. Look for Log Status and click Enabled. (By default the log is disabled.)
3. After enabling the log, you can make the following changes:
•
Syslog Server Address: [Optional] To enable the gateway to send messages to a syslog server as they
appear, type the IP address for the server in this field.
•
Syslog Server Port: By default the port number is 514. If the syslog server watches a different port, enter
that port number in this field.
4. Click Update Settings to save and apply your changes.
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]