User`s guide

USM-Metro-RKS1-091807-01 Ruckus Metro Broadband Gateway 43
Configuring Wireless Settings
Configuring Wireless Settings
To configure the wireless settings, follow these steps:
1. Open the Web User interface, and click Wireless under Configuration.
2. Make changes to the following options (if necessary):
• Wireless Mode: The wireless mode options include the following:
• Auto-Select: Allows both 802.11g- and 802.11b-compliant devices to connect to the network.
This is the default setting.
• 2.4GHz 54 Mbps (For faster 802.11g devices only): Allows only 802.11g-compliant devices to
join the network.
• 2.4GHz 11Mbps (For slower 802.11b devices only): Allows only 802.11b-compliant devices to
join the network.
• Country Code: This menu, if active, lets you pick your country or region code.
WARNING:—Selecting the incorrect country or region may result in violation of applicable law.
• Advanced Settings: For more on Advanced Settings, see "Reviewing the Advanced::Common
Options" on page 44.
• External Antenna Setting: If your Metro Broadband Gateway came with the optional external
antenna, and you have connected the antenna, you can enable it from this screen.
3. Click Update Settings to save your changes before reviewing the Advanced Settings.
Figure 35—Configure :: Wireless :: Common page
ALERT
If your Metro Broadband Gateway was shipped in the United States, the country
code was pre-defined for “United States” and cannot be modified.
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]