User`s guide

USM-Metro-RKS1-091807-01 Ruckus Metro Broadband Gateway 41
Configuring System Settings
Figure 33—Configure :: System in Repeater mode
3. Choose the system mode from Router, Bridge, Repeater or Tunnel/L2TP.
NOTE – To configure Tunnel/L2TP mode, see "Enabling an L2TP Connection" on page 42.
4. (Optional) Enter your configuration changes in the appropriate fields.
5. For DHCP Relay Mode, select either Relay or Forward. This option allows you to configure the DHCP
Relay to either relay or forward the DHCP packets between WAN and LAN.
6. Click the Update Settings button to save your settings.
7. Go to Maintenance :: Reboot/Reset and click Reboot Now to reboot the device so configuration changes
can take effect.
!
CAUTION:—You must click the Update Settings button to save any configuration changes. The Ruckus
Wireless Web Interface will timeout after 5 minutes of inactivity. If you let the system time out before clicking
the Update Settings button, any changes you made will be lost.
!
CAUTION:—If, after having changed any default settings, you have forgotten what the new settings are, you
may not be able to login to the Metro Broadband Gateway. To regain access to the Metro Broadband Gateway,
you must reset the device to its factory default settings. Hold the button down for more than 8 seconds, then
release. The Air Quality indicator will go off and then back on.
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]