User`s guide

38 Ruckus Metro Broadband Gateway USM-Metro-RKS1-091807-01
Configuring Internet Settings
Changing the Connection Type
There is one instance when you would change the IP address of the gateway: If the current IP address of the
Metro Broadband Gateway consistently conflicts with that of any other device in your wireless network.
To change the connection type (from DHCP to Static IP), follow these steps:
1. After logging into the Web User interface, click Internet under Configuration.
2. When the Configure :: Internet options appear, click the Static IP radio button by Connection Type to be
applied to this gateway.
Figure 30—Configuring a Static IP address
3. Fill in the related fields according to your ISP-provided information.
4. Click Update Settings to save and apply the changes.
ALERT
Perform this task only with guidance from your ISP. The required entry for static
IP should be available, if your gateway connection type is changed to either of
those types.
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]