User`s guide

USM-Metro-RKS1-091807-01 Ruckus Metro Broadband Gateway 37
Configuring Internet Settings
Configuring Internet Settings
By default, your Metro Broadband Gateway is configured to use DHCP and reflects the IP address of the
Mesh AP or your extended home wireless router at Gateway.
To review and modify the network configuration, follow these steps:
1. After logging into the Web User interface, click Internet under Configuration.
Figure 29—Configure :: Internet page, DHCP enabled
2. Verify that the Connection Type is “DHCP”. To change the connection type, see "Changing the Connection
Type" on page 38.
3. Ruckus recommends that you do not change the values for:
• Gateway: This is the gateway IP address of the Internet interface.
• Primary DNS Server: This is the primary Domain Name System (DNS) server IP address.
• Secondary DNS Server: This is the secondary Domain Name System (DNS) server IP address.
4. If you make changes, click Update Settings to save and apply the changes.
ALERT
Perform this task only in consultation with your Internet Service Provider.
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]