User`s guide

16 Ruckus Metro Broadband Gateway USM-Metro-RKS1-091807-01
Connecting to the Metro Broadband Gateway
Connecting to the Metro Broadband Gateway
Before using the Metro Broadband Gateway, you have to configure it to work within your home network.
Your service provider or installer will likely perform all installation tasks for you, or you may read the
following section to understand how to configure it manually.
The default IP address of the Metro Broadband Gateway is located on a label on the bottom of your device.
In order to connect to the Metro Broadband Gateway, your PC should be set to obtain an IP address
automatically.
Windows
Do as follows:
1. For Windows 2000: Select Start->Settings->Network and choose Dialup Connections
For Windows XP: Select Start->Settings->Control Panel-> Network Connections
2. Double-click the icon for the Local Area Connection designated for your home network. This is not the same
icon as your home wireless network.
3. In the Local Area Connection Properties window, select Internet Protocol (TCP/IP) and click Properties.
The window of appears.
Figure 11—Internet Protocol (TCP/IP) Properties for Microsoft Windows computers
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]