User`s guide

8000013, December 2006 MM2211 Wireless Broadband Gateway User’s Guide 39
Configuring the Wireless Interface
2. Check Dualzone Support
3. Enter your LAN SSID.
4. If you want to suppress broadcast of your SSID, check SSID suppress.
5. Choose the security option—either Disable, WEP, or WPA-PSK. The security configuration procedure will
depend on the option you select.
Configuring the LAN SSID With No Security
Choose Disabled as the security setting.
Click Update. If a notification that rebooting is required, follow the instructions.
Configuring the LAN SSID With WEP Security
1. Enter your LAN SSID and choose the LAN security option.
NOTE – If you choose WEP for both the WAN and LAN side then only keys 1 and 4 are active.
2. Click Edit Security Settings in the LAN section. The LAN Security Settings Window appears (Figure 18).
Figure 18—LAN Security Settings Window
Note that Shared Keys 2 and 3 are unavailable to you for the LAN side, since they were used for the WAN
side.
Table 11 explains the WEP Configuration parameters.