User`s guide

8000013, December 2006 MM2211 Wireless Broadband Gateway User’s Guide 29
Configuring the MM2211 Gateway
Figure 11—Configuration->System for Remote Management
The default setting is for NUTTCP Server Status to be disabled. If you check Enabled, the NUTTCP port
remains open to wait for the request from the service provider. Checking Oneshot opens the NUTTCP port
for one stream of data and then closes it.
NOTE – You must enable the default port 5000 and 5001 in a firewall environment for the control and data
port of NUTTCP.