User`s guide

28 MM2211 Wireless Broadband Gateway User’s Guide 8000013, December 2006
Configuring the MM2211 Gateway
2. Check Allow Remote HTTP Management and Allow Remote CLI Management.
3. Click IP Range Setting. The Remote IP Range Table window of Figure 10 appears.
Figure 10—Remote IP Range Table
4. Enter the IP addresses and subnet masks supplied by your service provider.
5. Click Update. Reboot for this to take effect.
NUTTCP
NUTTCP is a network performance measurement tool that is used by service providers. A stream of data is
sent to the MM2211, and the expected performance result is displayed on the service provider’s console. The
MM2211 implements the server side daemon to respond to queries from the service provider’s NUTTCP
client. The MM2211 has WebUI selection (with superuser privilege) to enable or disable the NUTTCP port.
NOTE – Your service provider cannot view any of your private data.
For superuser login, the Configuration->System window has a remote management section (Figure 11).