User guide

Ruckus Wireless MediaFlex 7811 Access Point 59
What is Auto Provisioning?
7811 Parameters Included in Auto Provisioning
The following 7811 parameters are synchronized over to the Adapter at the completion of the auto
provisioning stage (Table 17):
7811 Parameters Not Included in Auto Provisioning
The following less common parameters are not included. If you need to sync these parameters, you must
configure them using the Web user interface or the CLI (if provided) (Table 18).
Resetting to Factory Defaults
When the adapter is factory reset (by pressing the Reset button on the back of the unit for at least 8 seconds),
the auto provisioned parameters will be lost. The adapter will go back to the original parameters as
provisioned from the factory. If you want to retain the parameters from the AP, you must repeat the auto
provisioning process described above.
Table 17— 7811 Parameters Included in Auto Provisioning
Parameter Description
Country Code Configured country code for regulatory compliance
SSID Configured Service Set Identifier
Encryption mode Configured encryption mode status
Cipher Configured security encryption cipher
Passphrase Configured Pre-Shared Passphrase
Table 18— 7811 Parameters Not Included in Auto Provisioning
Parameter Description
User Name and Password You may want the AP and Adapter to have different usernames and passwords
Country Code Fixed Mode Set during manufacturing
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]