User guide

Ruckus Wireless MediaFlex 7811 Access Point 53
Administration Information
Administration Log
The current log screen shows the log messages kept by the Ruckus Wireless Router since it was last rebooted.
The log has limited size: the oldest messages are replaced as new messages arrive.
It also sends the messages to a server (the Syslog server) that you designate. To configure the administrator
log:
1. Go to Administration > Log. The window of Figure 37 opens.
2. Enable Log Status if you want to continue to send messages to your Syslog Server. Otherwise, disable Log
Status.
3. Enter the IP address of your Syslog Server.
4. Enter the Syslog Server Port Number. The default port number is 514.
5. Click Update Settings to save your settings.
Figure 37—Administration Log Window
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]