User guide

Ruckus Wireless MediaFlex 7811 Access Point 43
Upgrading the Firmware
Performing a Firmware Upgrade Using HTTP
1. Go to Maintenance > Upgrade. The window of Figure 27 appears.
2. If you want to perform the download using HTTP, select Web as the Upgrade Method.
Figure 27—Maintenance > Upgrade—Web/HTTP
3. Under Web Options, enter the full URL of the image control file name on the Web server.
4. Do one of the following:
• If you want to enable Auto Upgrade, select Enabled, and specify the interval to check for upgrades.
Click Save parameters only to save your settings. The upgrade occurs automatically according to the
scheduled time.
• If you want to perform a manual upgrade, click Perform Upgrade. The window shown in Figure 25
appears.
NOTE – When entering the server name for firmware upgrade, make sure the Fully Qualified Domain Name (FQDN)
is entered (for example, fwupdate.ruckuswireless.com).
Performing a Local Firmware Upgrade
Before you perform a local firmware upgrade, take note of the current software version on the Status ::
Device page. You need to know the current software version to verify that the upgrade process was
successfully completed.
To perform a local firmware upgrade
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]