User guide

42 Ruckus Wireless MediaFlex 7811 Access Point
Upgrading the Firmware
Performing a Firmware Upgrade Using FTP
1. Go to Maintenance > Upgrade. The window of Figure 26 appears.
2. If you want to perform the download using FTP, select FTP as the Upgrade Method.
Figure 26—Maintenance > Upgrade—FTP
3. Under FTP Options, enter the IP Address or the host name of the FTP server, the listening port (21 by default),
the image control file name, and the username and password for logging into the FTP server.
4. Do one of the following:
• If you want to enable Auto Upgrade, select Enabled, and specify the interval to check for upgrades.
Click Save parameters only to save your settings. The upgrade occurs automatically according to the
scheduled time.
• If you want to perform a manual upgrade, click Perform Upgrade. The window of Figure 25 appears.
NOTE – When entering the server name for firmware upgrade, make sure the Fully Qualified Domain Name (FQDN)
is entered (for example, fwupdate.ruckuswireless.com).
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]