User guide

26 Ruckus Wireless MediaFlex 7811 Access Point
Configuring the 7811
Configuring WPA
WPA PSK configuration menu allows automatic key generation based on a single passphrase. WPA-PSK
provides very strong security, but may not be supported on older wireless systems (in some cases, the older
wireless systems can be upgraded with the newer adapters to support WPA-PSK).
If you configure the 7811 with WPA-PSK, the other devices in the network will not connect unless they, too
are set to WPA-PSK, and are configured with the same passphrase.
Figure 15 shows the WPA-PSK window.
Figure 15—WPA-PSK Wireless Settings
1. Go to Configuration > Wireless.
2. Click the Video WLAN tab.
3. Select WPA-PSK in the Encryption Method drop-down menu.
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]