User guide

24 Ruckus Wireless MediaFlex 7811 Access Point
Configuring the 7811
Figure 13—Advanced Wireless Configuration Settings
NOTE – This window is used to set up the advanced wireless functions. These settings should only be changed by an
experienced administrator. Incorrect settings can impact wireless performance. It is recommended that you keep the
default settings for best performance.
4. Click Update Settings to save your settings.
5. Once back under the Configuration :: Wireless :: Common settings, click the Video WLAN tab.
Table 9—Advanced Wireless Settings
Field Description
Transmit Power Specifies the maximum transmit power level relative to the calibrated
power. Select the level of transmit power from the drop-down menu.
The default is Full
Beacon Interval The Beacon Interval value indicates the frequency interval of the
beacon in milliseconds. A beacon is a broadcast packet by Access
Point (AP) to synchronize wireless network. The default value is 100.
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]