User guide

8 Ruckus Wireless MediaFlex 7811 Access Point
LED Status Lights
Rear View
Figure 3—Rear view of the 7811
Table 2 describes the physical features of the AP’s rear panel.
Table 2—Rear Panel Features
Label Description
5 AC Power (Input 100-120V or 220-240V depending on the
country, 50/60HZ, 0.3A)
6 WAN port, a 10/100Mbps auto-sensing, autonegotiating
Ethernet port that needs to be connected to the broadband
gateway.
7 Over the Air Auto Provisioning Button (not active for current
release).
8
Reset button. Used only if you need to reset the 7811 to its
factory default settings. Insert the end of a paper clip or pin
into the hole and hold it in for at least 8 seconds.
5
67
8
4Gon www.4Gon.co.uk [e-mail] Tel: [phone] Fax: [phone]