| Encrust | Overview Specifications Power supply 220-240 V~ 50 Hz Power consumption 105W 1. Control panel Refrigerant/refrigerant amount R600a/28 9 2. Air outlet Weight 85kg 3. Lid Size 348% 249 x 325 mm 4, Viewing window 5 leo tray Before first use 6. Ica shovel Place the ica maker on a stable and flat surface, away from heat sources. Aka sure it has 20 cm of free 7. Evaporator space on all sides. Wait for approximately 2 hours after the ice maker has been leveled before using it. 8. Max water level 9.
Cleaning and maintenance Unplug the power cord before cleaning. Clean the ice maker regularly. If there is water left on the ice tray, gently push it back so the water goes back into the water container. Push the ica maker abut 75 mm outside the tabla {fig. 1} to be able to pane tha drain from underneath. Remove the drain plug and let all water out {fig. 2-3). Fig.1 Fig.2 Fig.3 Close the drain again and fill the water container with clean water.
Rangering och ledarhund Dra ut strémkakeln innan du rengör ismaskinen. Rengör ismaskinen regelbundet. Om det finns vatten kvar pa polisbrickan trycker du den försiktigt bakat s2 att vattnet inner tillbaka ned i vattenbehållaren. Skjut ismaskinen cirka 75 mm utanför barder fig. 1} fér att kunna ta bort avtappningspluggen och skippa ut allt vatten underifrån (fig. 2-3). Fig. Fig. Fig. Sit tillbaka avtappningspluggen ach fyll vattenbehållaren med rent vatten.
