Rubberseal 1 Gal. White Liquid Rubber : SDS : Page 8

ALL CLAIMS SHALL BE

DEEMED WAIVED UNLESS

MADE IN WRITING TO US

WITHIN FIFTEEN (15) DAYS

FROM THE DATE IT WAS,

OR REASONABLY SHOULD

HHAVE BEEN, DISCOVERED.

Lorem Ipsum

Rubberseal

is a water-based, low V.O.C., waterprooﬁng product speciﬁcally designed for protecting many types of home and industrial materials. Offering

exceptional chemical resistance, puncture resistance and elongation, Rubberseal

is a high-end emulsion that exhibits exceptional bond strengths.

PRODUCT DESCRIPTION: Rubberseal FRW-07 is a Matte Finish, Bright White, Elastomeric Acrylic, Reﬂective, Insulating Ceramic, Waterprooﬁng Protective, High

Build One Coat ENERGY STAR Coating. It is a water-based, high build formula that possesses waterprooﬁng, insulating and soundprooﬁng properties that beautiﬁes,

protects and extends the life of most any surface. It forms a thick rubber like ceramic shield of protection that expands and contracts with varying hot and cold

temperatures, plus excellent resistance to thermal shock. Unsurpassed in technology, Rubberseal FRW-07 is an energy saving reﬂective coating that offers superior

mildew resistance, ceramic insulation & soundprooﬁng, excellent

adhesion, U.V. ray reﬂectivity and a beautiful matte ﬁnish. An energy saving coating that combats the destructive environmental forces of nature. Rubberseal FRW-07

is ASTM D-6083 Compliant and qualiﬁes for the CLASS A Fire Rating as per ASTME84-01, NFPA 101 Life Safety Code. This easy to apply One Coat Roof Coating

System will provide many years of durable protection and outstanding beauty. Rubberseal FRW-07 is an inexpensive alternative solution to rooﬁng and re-rooﬁng.

USES: Excellent adhesion on weathered wood, shakes, plywood, clapboard, primed metal, galvanized, aluminum, tin, copper, asbestos, asphalt, urethane, polyester,

primed Styrofoam, ﬁberglass, built-up-roofs, bonded roof gravel, rolled rooﬁng, modiﬁed bitumen membranes, mineral surfaced rooﬁng, concrete tiles, clay tiles,

masonry tiles (ﬂat or barrel), primed synthetic or aluminum, adobe, slate, slab, properly prepared EPDM and various other substrates. Rubberseal FRW-07 is ideal

for residential, commercial and industrial applications. For ﬂat roofs or ponding water situations inquire about Rubberseal Extra Strength RXW-07.

SURFACE PREPARATION: Apply only to a sound, completely dry, well prepared surface. Leaks must be repaired before any coating is applied. If primer was applied,

it is essential that the primer surface is clean and dry and free of all moisture. If no primer was applied, prepare surface by thoroughly pressure washing with a water

and chlorine mixture using at least 1500 P.S.I. to remove any previous coatings, dirt, grease, and other foreign materials, especially mold, mildew and algae. Rubberseal

FRW-07 will resist mildew growth, but will not kill mildew already on the surface. Patch any holes, cracks, ﬂashings, valleys, vents, etc., with Rubberseal TR-02 Trowel

Grade, a Waterprooﬁng Caulk and Sealant. Seal all seams with Rubberseal Geotextile Fabric.

Metal: Clean surface of all grease, oil and foreign matter before priming. Rusted metal and uncoated metal must be primed with Rubberseal Metal Primer, a Red Iron

Oxide Primer Sealer. Use a degreaser on galvanized or coated metals which have oils or surface treatments. Check Rubberseal FRW-07 adhesion on galvanized or

coated metal by applying to a small area and evaluating after 48 hours. If lack of adhesion is present after evaluating, metal must be lightly scuffed without penetrating

the coated ﬁnish or galvanizing.

APPLICATION PROCEDURE: Stir well before using. Do not thin, use product as is. Mix multiple containers of color together for greater color consistency. Do not apply

when temperatures are below 45 degrees Fahrenheit or when humidity is very high. Do not apply when coating will be subjected to rain or heavy dew before it has had

enough time to dry (approx. 2 to 4 hours). Drying time will vary depending on temperature, humidity and location. Apply using brush, roller or spray. Spread coating

uniformly. Spread Rate will vary depending on surface. Apply at 22 to 24 mils wet ﬁlm thickness resulting in a minimum 11 mil total dry ﬁlm thickness which is mandatory

for warranty compliance.

Airless Sprayers: Use at least a 1 gallon per minute piston type airless sprayer with a minimum tip size of .027. Remove all line ﬁlters and gun ﬁlters before spraying.

CLEAN UP: Clean up all spills, tools and overspray immediately while the coating is still wet with warm soapy water.

STORAGE:

STORAGE: Rubberseal

is a non-ﬂammable liquid and does not present storage or transportation hazards. This product MUST be kept in heated storage if there is any

danger of outside temperatures reching below 40 degrees Farenheit (4.5 degrees Celsius). Product can be kept for up to one year.

CAUTION: Avoid eye contact. If eye contact occurs, ﬂush with water for 15 minutes. Consult a physician immediately. KEEP OUT OF REACH OF CHILDREN.

KEEP FROM FREEZING.

WARNING: This product can expose you to chemicals including ethylene glycol, which is known to the State of California to cause developmental and/or

reproductive harm. For more information, go to www.P65Warnings.ca.gov.

This product is not subject to controlled

products regulations

Statement of Responsibility: Before use,

user shall determine the suitability of the

product for its indended use, and the user

alone assumes all risks and liability

whatsoeverin connection therewithin.whatsoeverin connection therewithin.