Installation Guide

STEP 1 STEP 2
Parts Required
• LeftVerticalPanel(1)
• RightVerticalPanel(1)
• HingePlates(6)
• EuroScrews(12)
Top
Bottom
STEP 4
STEP 5
STEP 7
STEP 3
STEP 6
Parts Required
• TopPanel(1)
• ConrmatScrews(4)
Top
Top
Bottom
Parts Required
• BottomPanel(1)
• ConrmatScrews(4)
• Feet(4)
• FootScrews(12)
Bottom
Finished edge
all sides
Finished edge
all sides
Parts Required
• FixedShelf(1)
• ConrmatScrews(4)
• ScrewCovers(4)
Bottom
Assemblethexedshelf.Ensuretheshelfisnearthetopsideofthecabinet.
Insertconrmatscrewthroughfoot.
Top
Finished edge
all sides
Parts Required
• Backerboard(1)
• Nails(40)
Bottom
Attachthebackerboardto
thebasewiththeblackside
facingintothecabinetusing
thenailsprovided.
Top
Finished edge
all sides
Parts Required
• ShelfSupportPins(8)
Finished edge
Parts Required
• AdjustableShelves(2)
Bottom
Placetheadjustable
shelvesonthepins.
STEP 8
Horizontal
HORIZONTAL ADJUSTMENT
Adjusts gap size
between doors.
VERTICAL ADJUSTMENT
For doors not flush
at top or bottom.
Vertical
Vertical
Horizontal
HORIZONTAL ADJUSTMENT
Adjusts gap size
between doors.
VERTICAL ADJUSTMENT
For doors not flush
at top or bottom.
Vertical
Vertical
Load Capacity
Ensurecabinetissquarepriortoadjustinghinges.
30
30
30
30
30
Floor Mounting
150 lbs. total
STEP 11
Bottom
STEP 9
Parts Required
• Doors(2)
• MetalPlates(4)
• MetalPlateFasteners
 withScrews(12)
Bottom
Top
Top
STEP 10
Parts Required
• HingePlateScrews(12)
• DoorPads(4)
Door Assembly Instructions
STEP 13
STEP 12
Parts Required
• Hinges(6)
Centerhinge
platescrewin
hingeslot.
Installhingesto
hingeplates.
Repeatfor
otherside.
Parts Required
• Handles(2)
• HandleScrews(4)
Sidesoffoot
shouldbesquare
incorner.
Placecabinetindesiredlocationagainstwall.Levelcabinetusingadjustablefeet.
RaiseFront(turnright) RaiseSide(turnright)
Floor Mounting Adjusting Feet
Assembledoors
tothecabinet.
Adheredoorpadstotopand
bottomcornersofdoors.
Parts Required
• WallAttachmentBracket(1)
• PanHeadScrew(1)
• WallMountScrew(1)
• WallSpacer(1)
Installhangerbracketscrewthroughangle
bracketintothetopofthecabinet.Installwall
mountscrewthroughthebracketandintowall.
Screwmusthitastud.Usespacerasneeded.
Stud
WallMount
Screw
PanHeadScrew
Placepinsatdesiredlocations
foradjustableshelves.