SDS

OSHA permissible exposure limit (PEL), American Conference of Governmental Industrial Hygienists (ACGIH) Threshold Limit Value (TLV),
and any other exposure limit used or recommended by the chemical manufacturer, importer, or employer preparing the safety data sheet,
where available.
Hazardous Component(s)
ACGIH
OSHA PEL
AIHA WEEL
OTHER
Alcohols, C10-16, ethoxylated,
sulfates, sodium salts, 2EO
None
None
None
None
Sodium chloride
None
None
None
None
Polyethylene glycol MW 400
None
None
10 mg/m3 TWA Particulate
None
Appropriate engineering controls
Provide local exhaust or general dilution ventilation to keep exposure to airborne contaminants below the permissible exposure limits where mists or
vapors may be generated.
Individual protection measures
Respiratory: Air contamination monitoring should be carried out where mists or vapors are likely to be generated, to assure that the
employees are not exposed to airborne contaminants above the permissible exposure limits.
Eye: Splash-proof safety glasses are required to prevent eye contact where splashing of product may occur.
Hand/Body: Protective gloves are required where repeated or prolonged skin contact may occur.
Protective clothing is required where repeated or prolonged skin contact may occur.
Appearance: clear or opaque colored liquid gel
Odor: characteristic
Odor threshold: Not available.
pH: 6.50 - 7.00 (25 °C)
Melting point/ range: Not available.
Boiling point/range: Not available.
Flash point: > 93.3 °C (> 199.94 °F)
Evaporation rate: Not available.
Flammable/Explosive limits - lower: Not available.
Flammable/Explosive limits - upper: Not available.
Vapor pressure: Not available.
Vapor density: Not available.
Solubility in water: Soluble
Partition coefficient (n-octanol/water): Not available.
Autoignition temperature: Not available.
Decomposition temperature: Not available.
Viscosity: 4,000 - 10,000 mPa.s
VOC content: Not available.
Specific gravity: 1.020 – 1.050 at 20 °C (68°F)
Reactivity: This product may react with strong alkalies.
Chemical stability: Stable under normal ambient temperature (70°F, 21°C) and pressure (1 atm).
Possibility of hazardous reactions: Hazardous polymerization will not occur.
Conditions to avoid: Avoid storing in direct sunlight and avoid extremes of temperature.
Incompatible materials: Strong oxidizers.
Hazardous decomposition products: Thermal decomposition may release toxic and/or hazardous gases, including ammonia.
Likely routes of exposure including symptoms related to characteristics
Inhalation: Unlikely to occur due to the physical properties of the product. At elevated temperatures, vapors or mists may
cause irritation.
Skin contact: Not a hazard under normal use conditions.
Eye contact: May cause mild irritation.
Ingestion: May cause mild gastrointestinal irritation with nausea, vomiting, diarrhea and abdominal pain.
Physical/Chemical: No physical/chemical hazards are anticipated for this product.
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
9. PHYSICAL AND CHEMICAL PROPERTIES
10. STABILITY AND REACTIVITY
11. TOXICOLOGICAL INFORMATION