Operations Manual

SME VoIP Handset Guide 5.1
Proprietary and Confidential
Page | 74
NOTE: An incoming call can also be rejected by pressing the red “On-hook” key.
7.1.3 Silencing an Incoming Call
When the handset is alerting it is possible to press the left softkey “Silent” whereas the handset will continue to
alert, but without any heard ringing.
7.1.4 Ending a Call
To end an ongoing call, press the red “On-hook” key , and the call will be terminated. The duration of the
call is shown in the display. Furthermore, this duration time can also be viewed from the call list where the call is
stored.
NOTE: If one call is active and another call is on hold, then the active call will be terminated when pressing the
red “On-hook” button, and the handset automatically returns to the call on hold; i.e. the call on hold is now
active, and the user must press the red “On-hook” button again to terminate this call.
7.2 Initiating a Call
A call can be initiated from different locations on the handset:
- By entering the number directly from idle
- From the “Contacts” menu
- From the “Calls” menu
- From the “Central Directory”
How to initiate a call from these different directories is explained in the following sub sections.
7.2.1 Initiating a Call from Idle
When initiating a call, it must be done according to the following:
1. Enter the number of the person you want to call when the handset is in idle.
2. Press the green “Off-hook” button to call the number.