Operations Manual

SME VoIP Handset Guide 5.1
Proprietary and Confidential
Page | 45
Automatic keylock
If the “Automatic keylock” feature is enabled, the keypad will lock automatically after a certain amount of time
that the handset has not been used. The currently applied setting is displayed when highlighting or selecting the
menu “Automatic keylock”.
A list of selectable timeouts is displayed when the user enters the “Automatic keylock” menu. Any one of these
can be selected by pressing the left softkey “Select” when the desired time interval is highlighted. Afterwards,
when the handset has been inactive in the selected time interval the keypad will lock automatically.
NOTE: It is not possible to use the keys when these are locked. The user must unlock the keys by long-pressing
. Only emergency numbers (e.g. 911 or 112) can be called without having to unlock the keypad.
Change PIN
In “Change PIN” the handset security PIN code can be changed – the PIN code is i.e. used when settings are reset.
As seen above the current PIN code must be entered first to change it to a new PIN code.
6.5.7 Handset Name, Line, Reset Settings, Status
In the following settings, it is possible to change the handset name, select a line, reset settings, and see the
status data from the base station.
SETTINGS
Handset name
Line
Reset settings
Status