Operations Manual

SME VoIP Handset Guide 5.1
Proprietary and Confidential
Page | 37
Alert tone
Six different melodies can be chosen for the handset to play when an alarm occurs. A list of melodies is displayed
when entering the menu. Each displayed melody in the list can be selected by pressing the left softkey “Select”.
To hear the melody before selecting it, each melody on the list can be played by selecting the right softkey
“Play”. The softkey “Play” changes to “Stop” during playback and the playback can then be stopped by pressing
this button.
6.5.1.6 Vibrator
In the vibrator menu different vibrator options can be selected for the handset. The options for the handset
vibrator are as showed and explained below.
Off
This function disables vibrator whereas the handset will not vibrate at incoming calls.
Vibrate then ring
If this function is enabled the handset will start vibrating during an incoming call, and then after four times of
vibration the handset will stop to vibrate and only ring instead.
Vibrate only
With this function chosen the handset will only vibrate and not ring even though the ring signal is not mute.