Operations Manual

SME VoIP Handset Guide 5.1
Proprietary and Confidential
Page | 29
6.4 Connectivity
The “Connectivity” menu is entered in the menu by pressing the menu activity key in idle.
In this menu it is possible to register or deregister the handset to a certain base system. Moreover, the “Select
network” function makes it possible to register the handset to more than one base system.
6.4.1 Register
When a handset is to be registered on a base system, the user will be prompted for an access code (base
registration PIN) before the registration procedure is started. Since it is possible for the handset to be registered
on different base systems that are out of range of each other, the “Register” menu displays 10 different entries
with which the handset can be assigned to different base systems. When selecting an “Empty” entry the user is
prompted for the PIN code as shown below.
The access PIN code is default “0000” and cannot be changed via the handset. The access PIN code can only be
changed via the web interface on the base (please check the additional document via [2] for more information
about handset registration on a base system).