Operations Manual

SME VoIP Handset Guide 5.1
Proprietary and Confidential
Page | 24
6.2.2 Calling a Contact in the Central Directory
To call a contact from the central directory press the green “Off-hook” button, and the contact number that
currently appears on the screen will be called. Use right/left navigation key to scroll through the names.
If a contact has more numbers added an arrow is shown to the right of the contact, and by pressing the right/left
navigation keys it is possible to navigate between the different numbers assigned to that contact. The number
that currently appears on the screen is the one that is called.
6.2.3 Line
By pressing the left softkey “Line” it is possible to choose different lines for the call to be made through as for
example if the handset is assigned to different extension numbers, or to different PBX’s; as illustrated in the
picture below. By choosing one of these different lines the call is then routed through the selected one. The line
that is set in Settings > Line is used as default.
To see additional information on this “Line” feature, and more about the “Central Directory” setup on the base
station please check the user manual for the base station; reference [2].