User manual

8
ENGLISH
1
SECTION
 HOW TO INSTALL THE BASE STATION
a) Connect on the base station to a telephone socket (if available), using the provided telephone cable
and optional plug.
b) Connect the power adapter to an active power outlet and connect on the base station to the power
adapter.
c) Connect on the base station to a LAN (Local Area Network) port on your broadband connection
(modem, router, hub, switch etc.) using the provided Ethernet cable.
The light indicator on the top has two functions:
• Always on confi rms that the Ethernet cable is connected.
• Blinking indicates that the Ethernet cable is not connected.
c)
b)
a)
INSTALLATION AND BASIC FUNCTIONS
30 seconds wait for LED to light up after power reset
