User manual

25
ENGLISH
1
SECTION
PROBLEM POSSIBLE CAUSE SOLUTION
Handset is not
registering
(continued)
• The base station is not
connected .
• Make sure that the power supply is properly
connected to on the base station and
that the power is on.
No connection
between handset
and base station
• You are out of range of the
base station.
• The handset is not registered.
• The base station is not
connecte d to power.
• Move closer to the base station.
• Register the handset.
• Make sure the power supply is properly
connected to
on the base station and
that the power is on.
Handset on the
charging cradle does
not charge
• The cradle is not powered.
• The handset is not placed
properly in the charging cradle.
• The batteries are not inserted
correctly.
• Connect the power adapter of the charging
cradle to an active power outlet.
• Place the handset correctly in the charging
cradle.
• Check the position of the batteries.
Handset does not
ring
• The Skype status is set to
offl ine or do not disturb.
• The handset ringer may be off.
• The handset may be too far
away from the base station.
• Set your Skype status to online.
• Increase the ringer volume.
• Move closer to the base station.
INSTALLATION AND BASIC FUNCTIONS
NOTES:
•
This Installation Guide covers the basic installation process and the most common features of your
DUALphon e.
•
For more advanced functionality descriptions you should consult the User Manual found at
www.dualphone .net