User guide

SME VoIP System Guide, Version 1.9
Proprietary and Confidential
Chapter: Multi-cell Setup & Management
67
Click on Save button to keep modified changes of multi cell settings into the base station.
The Multi Cell data synchronization ONLY works when the relevant Time Server is set in
the system before Server/Subscriber profile is added or created. Refer to STEP 5.
IMPORTANT:
Base stations must be rebooted after the time server has been set.
STEP 10 Repeat STEP 1-9 as explained above for each base stations.
IMPORTANT:
It takes up to 5 minutes (synchronization time) to add a new base station to a Multi Cell System.
6.2 Synchronizing the Base stations
STEP 11 On each SME VoIP Configuration interface for the base station(s) navigate to the
Home/Status page and Click the Reboot button.
http://ArtTel.ru