User guide

SME VoIP System Guide, Version 1.9
Proprietary and Confidential
Chapter: SME VoIP Administration Interface
50
Sbase
Empty
Search Base. The criteria depends on the configuration of the
LDAP server. Example of the setting is CN=Users, DC=umber,
DC=loc
LDAP filter
Empty
LDAP Filter is used to as a search filter, e.g. setting LDAP filter
to (|(givenName=%*)(sn=%*)) the IP-DECT will use this filter
when requesting entries from the LDAP server. % will be
replaced with the entered prefix e.g searching on J will give the
filter (|(givenName=J*)(sn=J*)) resulting in a search for given
name starting with a J or surname starting with J.
Bind
Empty
Bind is the username that will be used when the IP-DECT phone
connects to the server
Password
Empty
Password is the password for the LDAP Server
Name
Empty
The name can be used to specify if sn+givenName or cn
(common name) is return in the LDAP search results
Work Number
Empty
Work number is used to specify that LDAP attribute that will be
mapped to the handset work number
Home Number
Empty
Home number is used to specify that LDAP attribute that will be
mapped to the handset home number
Mobile Number
Empty
Mobile number is used to specify that LDAP attribute that will
be mapped to the handset mobile number
5.12 Multi-cell Parameter Definitions
In this section, we describe the different parameters available in the Multi-cell configurations menu.
5.12.1 Settings for Base Unit
Description of Settings for Specific Base units is as follows:
Screenshot
http://ArtTel.ru