User guide

SME VoIP System Guide, Version 1.9
Proprietary and Confidential
Chapter: SME VoIP Administration Interface
40
Configuration
server
address
Empty
Server/device that provides configuration file to base station.
Type: DNS or IP address
Permitted value(s): AAA.BBB.CCC.DDD or <URL>
Base Specific
File
Empty
Base configuration file
Multi Cell
Specific File
Empty
The file name must be the chain id of the system.
E.g 00087b0a00b3.cfg
Permitted value(s): Format of file is chain ID.cfg
Configuration
File Download
Disabled
Base Specific file: Used when configuring a single cell base
Multicell Specific File: Used when configuring a multicell based
system
Base and Multicell Specific File: Used on out of factory bases to
specify VLAN and Multicell ID and settings.
SIP Log Server
Address
Empty
Permitted value(s): AAA.BBB.CCC.DDD or <URL>
Requires a predefined folder named: \SIP
Upload of SIP
Log
Disabled
Enable this option to save low level SIP debug messages to the
server. The SIP logs are saved in the file format:
<MAC_Address><Time_Stamp>SIP.log
Syslog Server
IP-Address
NA
Permitted value(s): AAA.BBB.CCC.DDD or <URL>
Syslog Server
Port
NA
Port number of syslog server.
Syslog Level
Off
Off: No data is saved on syslog server
Normal Operation: Normal operation events are logged, incoming
call, outgoing calls, handset registration, DECT location, and call lost
due to busy, critical system errors, general system information.
System Analyze: Handset roaming, handset firmware updates status.
The system analyze level also contains the messages from normal
operation.
Debug: Used by RTX for debug. Should not be enabled during normal
operation.
Select
Language
English
Web interface language. Number of available languages: English,
Dansk, Italiano, Tyrkie, Deutsch, Portuguese, Hrvatski, Srpski,
Slovenian, Nederlands, Francaise, Espanol, Russian, Polski.
Enable
Automatic
Prefix
Disabled
Disabled: Feature off.
Enabled: The base will add the leading digit defined in “Set Prefix for
Outgoing Calls”.
Enabled + fall through on * and #: Will enable detection of * or # at
the first digit of a dialled number. In case of detection the base will
not complete the dialled number with a leading 0.
Examples:
1: dialed number on handset * 1234 - > dialed number to the pabx
*1234
2: dialed number on handset #1234 - > dialed number to the pabx
#1234
3: dialed number on handset 1234 - > dialed number to the pabx
01234
Set Maximum
Digits of
Internal
Numbers
0
Used to detect internal numbers. In case of internal numbers no
prefix number will be added to the dialled number.
http://ArtTel.ru